WEB Client 39
Work Mode
Select work mode.
Main Camera Mode: Applied to doorways where the vehicle front bumper is
straight to the camera for snapshot. Refer to Standard Construction Scheme for
more details.
Main Camera + Panoramic Camera Mode: Applied to the doorways where the
vehicle front bumper is straight to the camera for both snapshot and surveillance.
Refer to Standard Construction Scheme for more details.
Click OK to finish configuration.
When work mode is selected as Main Camera Mode + Panoramic Camera Mode,
then Panoramic Camera will be displayed in the video stream bar on the upper left
corner of the Live interface.
5.4.1.2 Detection
5.4.1.2.1 Snapshot
In this section, you can set snapshot rule of the device.
Select Setting > ITC > Detection > Snapshot.
The Snapshot interface is displayed, see Figure 5-22.
To Next Page
Loading...
