WEB Client 26
Work Mode
Select work mode according to actual requirement.
Main Camera Mode: Applied to doorways where the vehicle front bumper is
straight to the camera for snapshot. Refer to Standard Construction Scheme for
more details.
Main Camera + Panoramic Camera Mode: Applied to the doorways where the
vehicle front bumper is straight to the camera for both snapshot and surveillance.
Refer to Standard Construction Scheme for more details.
Click OK.
The Plate Pixel interface is displayed, see Figure 5-3.
Plate pixel
Configure plate pixel box and make it the optimal plate size.
1) Drag zoom and focus bar.
Adjust visual field to the best.
2) Click Snapshot.
Snapshot becomes Resume.
To Next Page
Loading...
Need help?
General
