Dahua ITC237-PU1B-IR - Snapshot

19
Table 4-1
Step 3. Set camera IP address and etc., click Finish.
Figure 4-3
Note:
 Device initial IP address is 192.169.1.108; initial subnet mask is 255.255.255.0; initial gateway is
192.168.1.1.
 Time info can be modified in Setup>System>General>Date&Time. IP address can be modified in
Setup>Network>TCP/IP.
4.1.2 Snapshot
4.1.2.1 Snapshot
The snapshot interface is shown as in Figure 4-4 Snapshot.