Basic Configuration23
Reset password (1)
Scan the QR code according to the interface prompt, and send the scanning result to
designated email and acquire security code.
Input received security code in the text box of Security code.
Click Next.
The Reset the password is displayed.See Figure 4-23.
Reset password (2)
Set Password and Confirm Password.
The new password can be set from 8 characters to 32 characters and contains at least
two types from capital letter, small letter, number and special characters (excluding “'”,
“"”, “;”, “:” and “&”) The new password should be in accordance with the confirm
password. Follow the password security notice to set a high security level password.
Click OK and password reset is completed.
To Next Page
Loading...
