WEB Client 60
Video
Configure parameters according to actual requirement. Please refer to Table 5-23 for
more details.
Table 5-23 Video parameters description
Currently it supports general stream.
Currently it only supports H.264B, H.264M, H.264H, H.265 and
MJPEG.
Select resolution according to the actual situation.
Select frame rate according to the actual situation.
Include VBR and CBR.
Image quality can be set only in VBR mode while it cannot be set in
CBR mode.
Image quality can be set in VBR mode. There are 6 levels optional.
The value is the upper limit of the stream in VBR mode while it is fixed
in CBR mode.
P frame quantity between two I frames, it is max 150. The system
default is set twice as big as frame rate.
You can view if the video is tampered via verifying watermark
character.
Select Watermark Settings and enable the function.
Default Watermark character is: DigitalCCTV.
The watermark character can only consist of number, letter,
underline and maximum length contains 85 characters.
Select it and enable sub stream.
Currently it only supports general stream.
Currently it only supports H.264B, H.264M, H.264H, H.265 and
MJPEG.