Page.60.
When tester receives SDI camera image, it will display the image data.
Double-taps on the screen to make the image displayed full screen.
The tester supports resolution as follows:
1280x720P 25Hz
1280x720P 30Hz
1280x720P 50Hz
1280x720P 60Hz
1920x1080P 25Hz
1920x1080P 30Hz
1920x1080I 50Hz
1920x1080I 60Hz
The tester’s HDMI output port can be used as SDI to HDMI converter, output HD SDI image to HD TV
monitor.
Select relative function on the right side Toolbar to operate, “Snapshot“ , “Record”, “Photos ”,
“Video playback”, “PTZ control”, “Video Brightness and Storage set”, the operation is the same to
the video monitor function, please refer to the relevant instructions “3.3.1” in the manual.
Click , or press to quit.
To Next Page
Loading...