Page.6.
Cable test , Test LAN cable or telephone cable,UTP cable etc ,cable type and the sequence of
wires will be displayed
Support RS485,rate 600 ～ 115200bps adjustable
PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device.
PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position.
DC5V 2A power output for USB charging (No USB data exchange, voltage only).
PoE power output, supply temporary power for PoE camera.
DC5V 2A power output, as a power bank.
Audio input and output, test and output the audio signal.
7.4V 37Wh Battery. Remaining battery charge indicator, Lithium Ion Polymer Battery can last
10 hours for normal use after charging for 5-6 hours.
2.3 Function
With the new hardware decoding, display the image from the 4 K camera.
2.3.2 Retina display and touch screen operation
7 inch touch screen cctv tester with retina display, 1920*1200 resolution.
2.3.3 Intelligent interface
You can select “Lite mode ”or “Normal mode”. In normal mode, self-define desktop, press function
icons to enter screen management status. You can move the icon to any pages,self-define the number of
icons in any page. Make interface sample and individuality.
2.3.4 HDMI digital signal input
HDMI digital input , support resolution 720×480p /720×576p /1280×720p /1920×1080p
/1024×768p/1280×1024p /1280×900p /1440×900p. Digital video recorder and other devices can display
images of the tester through the HDMI input.
To Next Page
Loading...
Need help?
General