Page.73.
When test, need a tester or a computer installed Network Test Software as the Server, the other tester
sends packet test. The two testers must be in the same network segment.
a).Start the server: Click “Start Server” button to use the tester as a Server. It will display its IP
address at the top of the screen.
b). Start send packet test: Using the other tester, type in the Server's IP address at the top right corner
of the screen. This app is used to send packets for network speed testing. Click the “Start” button to
send the packets and start testing.
To Next Page
Loading...
Need help?
General