Dahua PFM906 - Page 95

Page.90.
1) SYMBOLS:
U:DC Voltage Measuring A:DC Current Measuring
Ω:Resistance Measuring :Diode Testing
U
~
:AC Voltage Measuring A
~
:AC Current Measuring
:Continuity Testing :Capacitance Measuring
AC/DC
Voltage and current measurement state display
Auto- range
The Multimeter auto adjust the range by input signal or tested components
Data hold
Hold data
Relative
measurement
Display the relative measurement value
Press the key to change display state
10A socket
In 10A current measurement state ,indicate use 10A socket
Over range
The current measurement value over the range, if in the Auto range state, to
switch Auto.
2) OPERATING INSTRUCTION