Operation Manual
4 Straight
This section introduces the interface design and function configuration.
4.1 Live interface
Sign in or click the tabLive(live).
The interface may vary according to different models, and the actual interface shall prevail.
Figure 4:1 live (single channel)
Figure 4:2 live (multi-channel)
Table 4:1 description of the function bar
No. Function Description
You can select the display mode between
general mode(General Mode) andface mode
(FaceMode).
1 display mode
Show all channels. You can select the channel as
needed and set the type of transmission.
two channel list
10
To Next Page
Loading...
Need help?
General
