Operation Manual
Figure 5:20 add ONVIF user
Step 3: Set user parameters
Table 5:9 description of ONVIF user parameters
Parameter Description
Unique identification of the user. You cannot use the
existing username.
Username
Password Enter the password and confirm it again.
The password must consist of 8 to 32 non-empty characters and
contain at least two types of characters including uppercase,
lowercase, numbers, and special characters (excluding ' " ; : &).
Confirm Password
The group to which the users belong. Each group has
different permissions.
Group name
Step 4: click onTo accept(OKAY).
The newly added user appears in the username list.
Related operations
● Click on to edit the password, group, note, or permissions.
For the administrator account, you can only change the password.
● Click on
can delete.
to remove the added users. The administrator user is not
The administrator account cannot be deleted.
5.3.3 Managers
5.3.3.1 Requirements
To ensure that the system works correctly, take the following actions:
● Check surveillance footage regularly.
● Regularly delete the information of users and user groups that are not used frequently.
● Change the password every three months. For details, please refer to " 5.3.2 Account."
33
To Next Page
Loading...
Need help?
General
