Operation Manual
Figure 1:2 setup flow
Yes
Access
It has started?
configure parameters
basic
configure parameters
of events
Nope
set direction
IP
configuration of
Initialize
alarm input
Set the time of
system
establish pairing
alarm
main task
secondary task
assessment task
set mail
electronic
Table 1:1 flow description
Setting Description Reference
Open the IE browser and input
the IP address to log in the web
interface. The IP address of the
camera is 192.168.1.108 by
default.
Access
" 3 Access".
Start the camera when you use it
for the first time.
" 2 Initializing the
device"
initialization
Please change the IP address
according to the network planning
to use the product for the first time
or during the network setting.
IP adress
" 5.1.1 TCP/IP"
parameters
basic
Set the date and time to make
sure the recording time is
correct.
date and
hour
" 5.3.1.2 Date and
hour"
two
To Next Page
Need help?
General
