Daikin SkyAir FHQ24PVJU - Centralized Control Group No. Setting; Brc1 E73

SiUS281811EA Centralized Control Group No. Setting
Part 3 Remote Controller 95
5. Centralized Control Group No. Setting
5.1 BRC1E73
In order to conduct the centralized remote control using the central remote controller and the unified
ON/OFF controller, Group No. settings should be made by group using the operating remote
controller.
Make Group No. settings for centralized remote control using the operating remote controller.
When initializing Group Address
Service settings menu Item 2
Group Address Group Address (Group)
Group Address (Unit)
Description
This menu is used to make group address setting for centralized control.
It is also used to make group address setting by indoor unit.
Select Group Address and
then press the Menu/OK
button.
Press the Cancel
button once.
Press the Cancel
button once.
Service
settings menu
is displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Basic screen
is displayed.
Press the Cancel
button once.
Select the desired
Group Address
using the /
(Up/Down) buttons,
and then press the
Menu/
OK button.
Item 2 is
displayed.
Select the desired
Unit No. using the
/ (Up/Down)
buttons, and then
select Group
Address using the
 buttons.
0
1-00
Press and hold
the Cancel
button for 4
seconds or
more.
Select Group
Address (Unit) and
then press the
Menu/OK button.
Press the Menu/ OK
button.