SiUS281811EA
144 Part 5 Field Settings and Test Operation
1. Field Setting from Remote Controller......................................................145
1.1 Wired Remote Controller.......................................................................... 145
1.2 Simplified Remote Controller.................................................................... 147
1.3 Wireless Remote Controller ..................................................................... 148
1.4 List of Field Settings for Indoor Unit ......................................................... 149
1.5 Details of Field Settings for Indoor Unit.................................................... 153
1.6 Operation Control Mode ........................................................................... 168
2. Field Settings from Outdoor Unit.............................................................169
2.1 Capacity Setting ....................................................................................... 169
2.2 Setting Mode and Monitor Mode .............................................................. 170
2.3 Setting Mode 1 ......................................................................................... 171
2.4 Setting Mode 2 ......................................................................................... 173
2.5 Monitor Mode ........................................................................................... 177
2.6 Setting of Low Noise Operation and Demand Operation ......................... 179
2.7 Setting of Refrigerant Recovery Mode ..................................................... 182
2.8 Setting of Vacuuming Mode ..................................................................... 182
2.9 Check Operation ...................................................................................... 183
2.10 Setting of Auxiliary Heater Control ........................................................... 184
2.11 Setting of Heat Pump Lockout and Emergency Heat Mode..................... 185
3. Test Operation ........................................................................................187
3.1 Check Work Prior to Turning Power Supply ON ...................................... 187
3.2 Turn Power ON ........................................................................................ 187
3.3 Test Operation.......................................................................................... 188
3.4 Error Codes and Corresponding Measures.............................................. 191
3.5 When Turning ON Power First Time ........................................................ 193
3.6 When Turning ON Power the Second Time and Subsequent.................. 193
3.7 When an Indoor Unit or Outdoor Unit has been Added,
or Indoor or Outdoor Unit PCB has been Changed.................................. 193
Part 5
Field Settings and
Test Operation
To Next Page
Loading...
