SiUS281811EA Troubleshooting with Remote Controller
Part 6 Service Diagnosis 205
3. Troubleshooting with Remote Controller
3.1 Wired Remote Controller
3.1.1 BRC1E73
The following will be displayed on the screen when an error (or a warning) occurs during operation.
Check the error code and take the corrective action specified for the particular model.
(1) Check if it is an error or warning.
(2) Taking corrective action.
Screen
Operation lamp
Operation Status Display
Abnormal
shutdown
The system stops
operating.
The operation lamp (green) starts to
blink. The message Error: Push Menu
button will blink at the bottom of the
screen.
Warning The system continues its
operation.
The operation lamp (green) remains
on. The message Warning: Push
Menu button will blink at the bottom of
the screen.
Press the Menu/OK button to check the error code.
Take the corrective action specific to the model.
Error code
Applicable
model names
FCQ18TAVJU
A6-01