Field Setting from Remote Controller SiUS281811EA
152 Part 5 Field Settings and Test Operation
Applicable Range of Field Settings
: Available
—: Not available
Mode
No.
First Code No. Description of Setting FCQ FHQ FAQ FBQ FTQ
10
(20)
0 Filter cleaning sign interval ―
0 Filter sign setting ――――
1Filter type ――――
1 Filter cleaning sign interval ――――
2 Thermistor selection
3 Filter sign display
6
Remote controller thermistor control during group
control
7 Time for absence area detection ――――
11
(21)
1 Auxiliary electric heater ON temperature ――――
1 Auxiliary electric heater ON/OFF temperature ――――
2 Auxiliary electric heater OFF temperature ――――
3 Setting of airflow rate when heating ――――
3 Electric heater setting ――――
5 Electric heater capacity setting ――――
6 Setting the rate of human detection ――――
7 Automatic airflow adjustment ――― ―
8 Compensating the temperature around people ――――
9
Compensating the floor temperature when
heating
――――
12
(22)
0 Optional accessories output selection
1 External ON/OFF input
2 Thermostat differential changeover
3 Airflow setting when heating thermostat is OFF
4 Automatic mode differential
5 Auto restart after power failure reset
6 Airflow setting when cooling thermostat is OFF
13
(23)
0 Ceiling height setting, setting of normal airflow ―
1 Airflow direction setting ― ――
2 Swing pattern settings ――――
4 Airflow direction adjustment range ― ――
6 External static pressure settings ――― ―
14
(24)
4
Optional kit setting (UV lamp + humidifier +
economizer)
――――
5 Residential dry ――――
15
(25)
0 Drain pump operation settings ――― ―
1 Humidification when heating thermostat is OFF
2 Direct duct connection ― ――
3 Drain pump and humidifier interlock selection ―
5 Individual ventilation setting
1b 4 Display of error codes on the remote controller
1c
0 Room temperature display
1
Thermistor sensor for auto changeover and
setback control by the remote controller
3 Access permission level setting
1e
2 Setback availability
14 Setting restricted/permitted of airflow block ――――