Daikin Stylish Series - Page 100

2 | Components
Service manual
100
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
To remove the top plate
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
1 Loosen and remove the screws that fix the top plate.
a b a aa aa
a Screw
b Top plate
2 Remove the top plate.
To remove the front plate
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Remove the top plate, see "2.13Plate work"[499].
1 Loosen and remove the screws that fix the front plate.
a
a a
a
a
a
a Screw
b Front plate
2 Remove the front plate.
To remove the compressor sound insulation
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Remove the front plate, see "2.13Plate work"[499].
1 Untwist the cord and remove the compressor sound insulation.