Daikin Stylish Series - Page 108

2 | Components
Service manual
108
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
To remove the front grille
CAUTION
Wear protective gloves.
1 Open the front panel. Refer to "To open the front panel"[4105].
2 Remove the service cover. Refer to "To open the service cover"[4107].
3 Remove the wire harness from the wire clamp and the connector.
4 Remove the flap by pushing it to the left side and towards you.
5 Remove the 2 screw covers using a long flat plate such as a ruler wrapped in a
cloth and remove 2 screws.
c
d
b
a
a Connector
b Wire clamp
c Screw cover
d Long flat plate wrapped in a cloth
6 Push the front grille up and then towards the mounting plate to remove the
front grille from the 3 hooks.
a
a Hook
Prerequisite: If working space is limited.
7 Insert a flat screwdriver next to the hooks.
8 Pull the front grille up using the flat screwdriver and push towards the
mounting plate.
b
a
a Hook
b Flat screwdriver