Daikin Stylish Series - Page 111

2 | Components
Service manual
111
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
a
a Compressor wire terminals cover
4 Disconnect the connector.
5 Remove the clip and remove the reactor from the compressor.
6 To install the reactor, see "2.14.2Repair procedures"[4110].
To install the reactor
1 Install the reactor in the correct location and install the clip.
2 Connect the reactor connector.
3 Install the cover of the compressor wire terminals.
a
a Compressor wire terminals cover
4 Install the compressor insulation.
Is the problem solved? Action
Yes No further actions required.
No Return to the troubleshooting of the
specific error and continue with the
next procedure.