Daikin Stylish Series - Page 115

2 | Components
Service manual
115
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
a
ba
a Screw
b Swing flap motor gearcase assembly
3 Disconnect the swing flap motor harness from the swing flap motor.
4 To install the swing flap motor gearcase assembly, see "Repair
procedures"[4114].
To install the swing flap motor gearcase assembly
1 Connect the swing flap motor harness to the swing flap motor connector.
2 Install the swing flap motor gearcase assembly on the indoor unit and tighten
using the 2 screws.
a
ba
a Screw
b Swing flap motor gearcase assembly
3 Install the main swing flap in the indoor unit (by clicking it on).
Is the problem solved? Action
Yes No further actions required.
No Return to the troubleshooting of the
specific error and continue with the
next procedure.