Daikin Stylish Series - Page 117

2 | Components
Service manual
117
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
c a
b
a Fan guard
b Rocker arm
c Swing raster
4 Remove the 3 screws from the swing flap motor gear case assembly. Do NOT
yet remove the assembly from the indoor unit.
aa b
a
a Screw
b Swing flap motor gearcase assembly
5 Disconnect the rocker arm from the swing raster.
6 Remove the swing flap motor gear case assembly from the indoor unit.
7 Disconnect the harness from the swing flap motor.
8 Disconnect the harness from the swing raster motor.
9 To install the swing flap motor gearcase assembly, see "Repair
procedures"[4116].
To install the swing flap motor gearcase assembly
1 Connect the harness to the swing raster motor connector.
2 Install the swing flap motor gearcase assembly on the indoor unit. Install the 3
screws, but do NOT yet tighten them.