2 | Components
Service manual
130
(C)(F)TXA15~50A(W)(S)(T) + (C)(F)TXA15~50B(B)(S)(T) + RXA42+50A +
RXA20~35A + RXA42+50B
Split Stylish R32
ESIE18-03C – 2020.02
a Wifi control PCB assembly
3 To install the wifi control PCB assembly, see "2.19.2 Repair
procedures"[4129].
To install the wifi control PCB
1 Click the wifi control PCB assembly on the indoor unit.
a Wifi control PCB assembly
2 Route the wifi control PCB harness inside the switch box, along the harness
retainers.
3 Connect the wifi control PCB harness to the appropriate connector on the
indoor unit PCB.
WARNING
When reconnecting a connector to the PCB, do NOT apply force, as this may damage
the connector or connector pins of the PCB.
Is the problem solved? Action
Yes No further actions required.
No Return to the troubleshooting of the
specific error and continue with the
next procedure.
To Next Page
Loading...
