dallmeier DVE-4 - Reboot; Reset; Import Configuration

DVE-4 / DVE-8 / DVE-16
www.dallmeier.com 32
5.7.1 Reboot
Proceed as follows in order to reboot the device:
 Click Reboot.
 Conrm the subsequent info dialog.
The device is rebooting.
5.7.2 Reset
The default settings of the device can be restored to the network conguration or the device
can also be completely reset to factory settings.
Restore
The default settings are restored. The network settings and the data of the user manage-
ment remain.
 Click Restore.
 Conrm the subsequent info dialog.
The device will restart after the restore.
Default Settings
The device is entirely reset to factory settings. All settings are deleted.
NOTICE
The device is no longer under the set IP address reachable if it has been
changed!
 Use the tool “PService” to locate the device on the network.
 Click Default.
 Conrm the subsequent info dialog.
The device will restart after resetting to factory settings.
5.7.3 ImportConguration
A conguration le can be imported.
 Click Browse in the Import Cong. File section.
 Select with the le explorer the required conguration le.
 Click Open.
The conguration le is displayed in the Cong File eld.