dallmeier DVE-4 - Export Configuration; Firmware Upgrade

DVE-4 / DVE-8 / DVE-16
www.dallmeier.com 33
 Click Import.
The conguration settings are restored and the device is restarted.
5.7.4 ExportConguration
Settings and parameters can be exported to a conguration le. This can be re-imported
as described above.
 Click Export in the Export Cong. File section.
 Select a storage directory in the le explorer.
 Enter a Name for the conguration le.
 Click Save.
The conguration le is exported.
5.7.5 Firmware Upgrade
The Maintenance dialog allows to set up a rmware upgrade.
 Click Browse in the Remote Upgrade section.
 Select the storage directory of the rmware upgrade le.
 Select the rmware upgrade le.
 Click Open.
The le is displayed in the Firmware eld.
 Click Upgrade.
The rmware upgrade is performed. The device is then restarted.