VLT
®
MICRO
General Technical Data
AC line supply (L1, L2, L3):
Supply voltage 200-240 V units ............................ 1 x 200/208/220/230/240 V ±10%
Supply voltage 200-240 V units ............................ 3 x 200/208/220/230/240 V ±10%
Supply frequency .......................................................................................... 50/60 Hz
Max. imbalance of supply voltage .................................... ±2% of rated supply voltage
Power factor/cos ϕ ............................................................................0.90/1.0 at rated load
Max short circuit rating ..................................................................................... 5000 A
VLT output data (U, V, W):
Output voltage ..................................................................... 0-100% of supply voltage
Output frequency..................................................................................... 0.1 - 400 Hz
Rated motor voltage, 200-240 V units ................................... 200/208/220/230/240 V
Rated motor frequency ................................................................................. 50/60 Hz
Switching on output...................................................................................... Protected
Ramp times ............................................................................................. 0.1-600 sec.
Torque characteristics:
Starting torque.................................................................................... 150% for 1 min.
Acceleration torque ............................................................................................ 100%
Overload torque, 200-240 V ............................................................... 150% for 1 min.
Control card, digital inputs:
Number of programmable digital inputs ..................................................................... 6
Terminal nos. ....................................................................... M0, M1, M2, M3, M4, M5
3
To Next Page
Loading...
