Danfoss MCA 122 Modbus TCP - Parameter List

12-98 Interface Counters
Range: Function:
4000 * [0 - 4294967295 ] Read only. Advanced Interface
counters, from built-in switch, can be
used for low-level troubleshooting,
The parameter shows a sum of port
1+port 2.
12-99 Media Counters
Range: Function:
0 * [0 - 4294967295 ] Read only. Advanced Interface counters,
from built-in switch, can be used for
low-level troubleshooting, The
parameter shows a sum of port 1+port
2.
5.3 Parameter List
Parameter Default value 4-set-up Change during
operation
Conver-
sion index
Type
8-0* General Settings
8-01 Control Site [0] Digital and ctrl.word All set-ups TRUE - Uint8
8-02 Control Word Source null All set-ups TRUE - Uint8
8-03 Control Word Timeout Time 1.0 s 1 set-up TRUE -1 Uint32
8-04 Control Word Timeout Function null 1 set-up TRUE - Uint8
8-05 End-of-Timeout Function [1] Resume set-up 1 set-up TRUE - Uint8
8-06 Reset Control Word Timeout [0] Do not reset All set-ups TRUE - Uint8
8-1* Ctrl. Word Settings
8-10 Control Word Profile [0] FC profile All set-ups TRUE - Uint8
8-13 Configurable Status Word STW [1] Profile default All set-ups TRUE - Uint8
8-14 Configurable Control Word CTW [1] Profile default All set-ups TRUE - Uint8
8-5* Digital/Bus
8-50 Coasting Select [3] Logic OR All set-ups TRUE - Uint8
8-51 Quick Stop Select [3] Logic OR All set-ups TRUE - Uint8
8-52 DC Brake Select [3] Logic OR All set-ups TRUE - Uint8
8-53 Start Select [3] Logic OR All set-ups TRUE - Uint8
8-54 Reversing Select [3] Logic OR All set-ups TRUE - Uint8
8-55 Set-up Select [3] Logic OR All set-ups TRUE - Uint8
8-56 Preset Reference Select [3] Logic OR All set-ups TRUE - Uint8
Table 5.2 Parameter Group 8-**
Parameters MCA 122 Modbus TCP
34 MG90P202 - VLT
®
is a protected Danfoss trademark
5
5