Page 91 of 108
M-AP-001-EN Rev. N
Shipping Considerations
When shipping the compressor as an integral part of a chiller unit, precautions should be
taken to protect the compressor motor cooling line from excessive vibration. Due to the
exibility of the compressor’s isolation mounts, compressor vibration during transit can
fracture the motor cooling line’s rigid piping. DTC suggests the temporary installation of
an anti-vibration bracket between the compressor’s base frame and mounting rail during
transit, as shown in Figure 19-1.
19.1 Vibration
19 Shipping
Considerations
Figure 19-1 - Anti-Vibration
Bracket
THIS PAGE INTENTIONALLY LEFT BLANK
To Next Page
Loading...
Need help?
General
