0-65 Quick Menu Password
Range: Function:
200* [-9999 -
9999 ]
Define the password for access to the Quick
Menu via the [Quick Menu] key. If
parameter 0-66 Access to Quick Menu w/o
Password is set to [0] Full access, this
parameter is ignored.
0-66 Access to Quick Menu w/o Password
If 0-61 Access to Main Menu w/o Password is set to [0] Full access
then this parameter is ignored.
Option: Function:
[0] * Full access
Disables the password defined in
parameter 0-65 Quick Menu Password.
[1] LCP: Read only Prevents unauthorised editing of Quick
Menu parameters.
[3] Bus: Read only Read only functions for Quick Menu
parameters on Fieldbus and/or FC standard
bus.
[5] All: Read only Read only function for Quick Menu
parameters on LCP, Fieldbus or FC standard
bus.
0-67 Bus Password Access
Range: Function:
0* [0 - 9999 ] Writing to this parameter enables users to
unlock the frequency converter from bus/MCT
10 Set-up Software.
How to Programme Operating Instructions
MG33X402 Danfoss A/S © Rev. 05/2014 All rights reserved. 47
6 6
To Next Page
Loading...
