Danfoss VLT AutomationDrive FC 300 Series - Page 136

130BB838.11
A
B
C
D
E
F
Illustration 7.42 Parallel Motor Connection
c, d) The total motor cable length specified in section 4.5, General Specifications, is valid as long as the parallel cables are
kept short (less than 10 m each).
d, e) Consider voltage drop across the motor cables.
e) Be aware of the maximum motor cable length specified in Table 7.35.
e) Use LC filter for long parallel cables.
Electrical Installation
VLT
®
AutomationDrive FC 300 Design Guide, 0.25-75 kW
134 MG33BE02 - VLT
®
is a registered Danfoss trademark
77
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-21462-Danfoss-131B8966-VLT-Automation-VT-Drive-VFD-FC301-230V-5-HP.aspx