Danfoss VLT AutomationDrive FC 300 Series - Page 4

3.7.1 PELV - Protective Extra Low Voltage 43
3.8 Brake Functions
44
3.8.1 Mechanical Holding Brake 45
3.8.2 Dynamic Braking 45
3.8.3 Selection of Brake Resistor 45
3.8.4 Brake Resistor Cabling 46
3.9 Mechanical brake control
47
3.9.1 Hoist Mechanical Brake 48
3.10 Smart Logic Controller
50
3.11 Extreme Running Conditions
51
3.12 Safe Stop
52
3.12.2 Installation of External Safety Device in Combination with MCB 112 57
3.12.3 Safe Stop Commissioning Test 58
4 FC 300 Selection
59
4.1 Electrical Data - 200-240 V
59
4.2 General Specifications
72
4.2.1 Measured Values for dU/dt Testing 76
4.3 Efficiency
78
4.4 Acoustic noise
78
4.5 dU/dt Conditions
79
4.6 Special Conditions
79
4.6.2 Derating for Ambient Temperature, Frame Size A 79
4.6.3 Derating for Ambient Temperature, Frame Size B 80
4.6.4 Derating for Ambient Temperature, Frame Size C 83
4.6.7 Automatic Derating 86
5 How to Order
87
5.1.1 Ordering from Type Code 87
5.1.2 Drive Configurator 87
5.2.1 Ordering Numbers: Options and Accessories 90
5.2.2 Ordering Numbers: Spare Parts 93
5.2.3 Ordering Numbers: Accessory Bags 93
5.2.4 Ordering Numbers: Brake Resistors FC 301 94
5.2.5 Ordering Numbers: Brake Resistors FC 302 96
5.2.6 Miscellaneous Flat Packs 100
5.2.7 Ordering Numbers: Harmonic Filters 102
5.2.8 Ordering Numbers: Sine Wave Filters 104
5.2.9 Ordering Numbers: dU/dt Filters, 200-690 V AC 106
6 Mechanical Installation - Frame Sizes A, B and C
107
Contents
VLT
®
AutomationDrive FC 300 Design Guide, 0.25-75 kW
2 MG33BE02 - VLT
®
is a registered Danfoss trademark
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-21462-Danfoss-131B8966-VLT-Automation-VT-Drive-VFD-FC301-230V-5-HP.aspx