Danfoss VLT AutomationDrive FC 300 Programming Guide

0-66 Access to Quick Menu w/o Password
Option: Function:
[0] * Full access Disables the password defined in par. 0-65 Quick Menu Password .
[1] LCP: Read only Prevents unauthorised editing of Quick Menu parameters.
[2] LCP: No access Prevents unauthorised viewing and editing of Quick Menu parameters.
[3] Bus: Read only Read only functions for Quick Menu parameters on fieldbus and/ or FC standard bus.
[4] Bus: No access No access to Quick Menu parameters is allowed via fieldbus and/ or FC standard bus.
[5] All: Read only read only function for Quick Menu parameters on LCP, fieldbus or FC standard bus.
[6] All: No access No access from LCP, fieldbus or FC standard bus is allowed.
If par. 0-61
Access to Main Menu w/o Password is set to Full access [0] then this parameter will be ignored.
0-67 Bus Password Access
Range: Function:
0* [0 - 9999 ] Writing to this parameter enables users to unlock the frequency converter from bus/ MCT10.
3 Parameter descriptions FC 300 Programming Guide
44 MG.33.M8.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT AutomationDrive FC 300 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300
Category	DC Drives
Language	English