26-37 Term. X42/5 Live Zero
26-4* Analog Out X42/7
26-40 Terminal X42/7 Output
26-41 Terminal X42/7 Min. Scale
26-42 Terminal X42/7 Max. Scale
26-43 Terminal X42/7 Bus Control
26-44 Terminal X42/7 Timeout Preset
26-5* Analog Out X42/9
26-50 Terminal X42/9 Output
26-51 Terminal X42/9 Min. Scale
26-52 Terminal X42/9 Max. Scale
26-53 Terminal X42/9 Bus Control
26-54 Terminal X42/9 Timeout Preset
26-6* Analog Out X42/11
26-60 Terminal X42/11 Output
26-61 Terminal X42/11 Min. Scale
26-62 Terminal X42/11 Max. Scale
26-63 Terminal X42/11 Bus Control
26-64 Terminal X42/11 Timeout Preset
28-** Compressor Functions
28-1* Oil Return Management
28-10 Oil Return Management
28-11 Low Speed Running Time
28-12 Fixed Boost Interval
28-13 Boost Duration
28-2* Discharge Temperature Monitor
28-20 Temperature Source
28-21 Temperature Unit
28-24 Warning Level
28-25 Warning Action
28-26 Emergency Level
28-27 Discharge Temperature
28-7* Day/Night Settings
28-71 Day/Night Bus Indicator
28-72 Enable Day/Night Via Bus
28-73 Night Setback
28-74 Night Speed Drop [RPM]
28-75 Night Speed Drop Override
28-76 Night Speed Drop [Hz]
28-8* P0 Optimization
28-81 dP0 Offset
28-82 P0
28-83 P0 Setpoint
28-84 P0 Reference
28-85 P0 Minimum Reference
28-86 P0 Maximum Reference
28-87 Most Loaded Controller
28-9* Injection Control
28-90 Injection On
28-91 Delayed Compressor Start
30-** Special Features
30-2* Adv. Start Adjust
30-22 Locked Rotor Protection
30-23 Locked Rotor Detection Time [s]
31-** Bypass Option
31-00 Bypass Mode
31-01 Bypass Start Time Delay
31-02 Bypass Trip Time Delay
31-03 Test Mode Activation
31-10 Bypass Status Word
31-11 Bypass Running Hours
31-19 Remote Bypass Activation
Programming Operating Instructions
MG16J202 Danfoss A/S © Rev. 05/2014 All rights reserved. 75
6 6
To Next Page
Loading...
Need help?
General