Danfoss VLT FC 302

6.3.2 0-** Operation/Display
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-02 Motor speed unit [0] RPM 2 set-ups FALSE - Uint8
0-03 Regional settings [0] International 2 set-ups FALSE - Uint8
0-04 Operating state at power-up (hand) [1] Forced stop, ref=old All set-ups TRUE - Uint8
0-09 Performance monitor 0.0 % All set-ups TRUE -1 Uint16
0-1* Set-up Operations
0-10 Active set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Edit set-up [1] Set-up 1 All set-ups TRUE - Uint8
0-12 This set-up linked to [0] Not linked All set-ups FALSE - Uint8
0-13 Readout: Linked set-ups 0 N/A All set-ups FALSE 0 Uint16
0-14 Readout: Edit set-ups/channel 0 N/A All set-ups TRUE 0 Int32
0-15 Readout: actual setup 0 N/A All set-ups FALSE 0 Uint8
0-2* LCP Display
0-20 Display Line 1.1 small 1617 All set-ups TRUE - Uint16
0-21 Display Line 1.2 small 1614 All set-ups TRUE - Uint16
0-22 Display Line 1.3 small 1610 All set-ups TRUE - Uint16
0-23 Display Line 2 large 1613 All set-ups TRUE - Uint16
0-24 Display Line 3 large 1602 All set-ups TRUE - Uint16
0-25 My personal menu App.Dependent 1 set-up TRUE 0 Uint16
0-3* LCP Custom Readout
0-30 Unit for user-defined readout [0] None All set-ups TRUE - Uint8
0-31 Min value of user-defined readout 0.00 CustomReadoutUnit All set-ups TRUE -2 Int32
0-32 Max value of user-defined readout
100.00 CustomRea-
doutUnit All set-ups TRUE -2 Int32
0-37 Display text 1 0 N/A 1 set-up TRUE 0 VisStr[25]
0-38 Display text 2 0 N/A 1 set-up TRUE 0 VisStr[25]
0-39 Display text 3 0 N/A 1 set-up TRUE 0 VisStr[25]
0-4* LCP Keypad
0-40 [Hand on] key on LCP null All set-ups TRUE - Uint8
0-41 [Off] key on LCP null All set-ups TRUE - Uint8
0-42 [Auto on] key on LCP null All set-ups TRUE - Uint8
0-43 [Reset] key on LCP null All set-ups TRUE - Uint8
0-44 [Off/Reset] key on LCP null All set-ups TRUE - Uint8
0-45 [Drive Bypass] key on LCP null All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 LCP copy [0] No copy All set-ups FALSE - Uint8
0-51 Set-up copy [0] No copy All set-ups FALSE - Uint8
0-6* Password
0-60 Main menu password 100 N/A 1 set-up TRUE 0 Int16
0-61 Access to main menu w/o password [0] Full access 1 set-up TRUE - Uint8
0-65 Quick menu password 200 N/A 1 set-up TRUE 0 Int16
0-66 Access to quick menu w/o password [0] Full access 1 set-up TRUE - Uint8
0-67 Bus password access 0 N/A All set-ups TRUE 0 Uint16
Programming Operating Instructions
74 Danfoss A/S © Rev. 2014-07-29 All rights reserved. MG37A202
66