Danfoss VLT Micro Drive FC 51 Programming Guide

Reference/Ramps................................................................................. 57
Reset................................................................................................... 66, 67
Residual Current Device....................................................................... 4
S
Serial Communication.......................... 9, 24, 30, 37, 38, 39, 48, 49
Set-up Number........................................................................................ 8
Short Circuit............................................................................................ 66
Slip Compensation................................................................. 17, 50, 56
Smart Logic............................................................................................. 60
Special Functions...........................................................................
45, 61
Status Menu.............................................................................................. 9
Symbols...................................................................................................... 7
T
Thermal Load.................................................................................. 15, 48
Thermistor
Thermistor............................................................................ 18, 66, 50
Resource.............................................................................................. 56
Trip Reset................................................................................................. 45
Troubleshooting...................................................................................
63
Type Code String..................................................................................... 5
U
Unit............................................................................................................... 8
V
Value............................................................................................................ 8
Index
VLT
®
Micro Drive FC 51 Programming Guide
70 MG02C602 - VLT
®
is a registered Danfoss trademark
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-12769-Danfoss-132F0026-VFD-Micro-Drive-440V-5HP.aspx

Danfoss VLT Micro Drive FC 51 Specifications

General

Enclosure	IP20
Output Voltage	0-100% of supply voltage
Altitude	Up to 1000 m without derating
Power Range	0.18-22 kW
Control Method	V/f
Communication	Modbus RTU
Protection Features	Over-voltage, under-voltage, over-current, over-temperature
Ambient Temperature	-10°C to 50°C
Storage Temperature	-25°C to 65°C
Relative Humidity	5-95% (non-condensing)
Input Voltage	200-240 V, 380-480 V
Braking Function	Integrated braking chopper (optional)