Danfoss VT2800 Series User Manual

VLT
®
2800 Series
621-642 Nameplate
Value:
Par.
no
Description
Nameplate
Display text
621 Unit type (DRIVE TYPE)
624 Software version (SOFTWARE VERSION)
625 LCP identification no. (LCP VERSION)
626 Database identification no. (DATABASE VER.)
627 Pow e r parts version (POWER UNIT DB ID)
628 Application option type (APP. OPTION)
630 Co m munication opt ion type (CO M. OPTION)
632 BMC software ide ntification (BMC-SOFTWARE ID)
634 Unit identification for com m u nica tion (UNIT ID)
635 Software parts no. (SW. PART NO.)
640 Software version (SOFTWARE VERSION)
641 BMC-software identificat ion (BMC2 SW)
642 Power card identification (POWER ID)
Function:
The unit’s main data can be read out from parameters
621 to 635 Nameplate using the LCP 2 control unit
or serial communicat ion. Parameters 640 - 6 42 can
also be seen on the unit’s integral display.
Description of choice:
Parameter 621 Nameplate: Unit type:
Gives unit size and mains voltage.
Example: VLT 2811 380-480 V.
Parameter 624 Nameplate: Software version no.
The unit’s present software version number
appears here.
Example: V 1.00
Parameter 625 Nameplate: LCP 2 ID number:
The ID number of the unit’s LC P 2 appears here.
Example: ID 1.42 2 kB
Parameter 626 Nameplate: Database ID number:
The ID number of the software’s database
appears here.
Example: ID 1.14.
Parameter 627 Nameplate: Power section version:
The ID number of the unit’s power section appears here.
Example: ID 1.15.
Parameter 628 Nameplate: Application option type:
Here you can see which types of application options
are installed in the frequency converter.
Parameter 630 Nameplate: Communication
option type:
Here you can see which types of communication
options are installed in the frequency converter.
Parameter 632 Nameplate: BMC software
identification:
The ID number of the BMC software appears here.
Parameter 634 Nameplate: Unit identification
for communication:
The ID number for communication appears here.
Parameter 635 Nameplate: Software section no.:
The software section number appears here.
Parameter 640 Nameplate: Software version:
The unit’s present software version number
appears here. Example: 1.00
Parameter 641 Nameplate: BMC software
identification:
The ID number of the BMC software appears here.
Parameter 642 N ameplate: Power card identification:
The ID number of the unit’s power part appears
here. Example: 1.15
✭ = factory setting. () = di splay text [] = value for use in communication via serial communicat ion port
MG.28.E9.02 - VLT is a registered Danfoss trademark
130

Danfoss VT2800 Series Specifications

General

Brand	Danfoss
Model	VT2800 Series
Category	Controller
Language	English