Data Aire DAP III User Manual

35
UNIT SHUTDOWN - All functions cease until condition is corrected.
COMPRESSOR LOCKOUT - Compressors are locked out, other functions
continue.
SELECT  or  - To change current setting
Factory setting is: NONE
MENU  - To view next sub-menu
Display will read: 4-10 NO WATER FLOW ALARM ACTION
SELECT  or  - To view current setting
Display will read: 4-10 NO WATER FLOW ALARM ACTION
ACTION: NONE
There are two available selections:
NONE
COMPRESSOR LOCKOUT - Compressors are locked out, other functions
continue.
SELECT  or  - To change current setting
Factory setting is: NONE
MENU  - To view next sub-menu
Display will read: 4-11 PERSON TO CONTACT ON ALARM
SELECT  or  - To view current setting
Display will read: 4-11 PERSON TO CONTACT ON ALARM
CONTACT MESSAGE NOT USED
There are fi ve available selections:
CONTACT MESSAGE NOT USED
ALARM: CONTACT DATA PROCESSING MANAGER
ALARM: CONTACT MAINTENANCE ENGINEER
ALARM: CONTACT SERVICE COMPANY
ALARM: CUSTOM MESSAGE - Requires programming at Data Aire factory.
NOTE: Custom message is optional and requires programming at the Data Aire factory.
SELECT  or  - To change current setting
Factory setting is: CONTACT MESSAGE NOT USED
MENU  - To view next sub-menu
Display will read: 4-12 MESSAGE FOR OPT. ALARM INPUT 1
SELECT  or  - To view current setting
Display will read: 4-12 MESSAGE FOR OPT. ALARM INPUT 1
aaaa

Data Aire DAP III Specifications

General

Brand	Data Aire
Model	DAP III
Category	Security System
Language	English