18 Using the System
The system then processes the emboss data. The emboss function is a two-step process. First the
characters are embossed and then topping foil is applied to those characters.
Secure Encryption
Secure encryption on the system means that all data entered is converted into a secure form of
code by your software application before it is sent to the system. The printer decrypts the code
and sends the data to the magnetic stripe or smart card chip on the card.
The printer uses advanced SSL/TLS encryption that supports the AES-256 (Advanced Encryption
Standard) and 3DES (Triple Data Encryption Standard).
The printer does not accept magnetic stripe or smart card data that is not encrypted. If non-
encrypted data is sent to the printer, a message displays on the printer’s LCD panel and the card is
rejected.
Power On the System
1. Power on the system by pressing the power button on the front panel.
2. Wait until the system has powered on and Ready displays on the LCD panel.
To Next Page
Loading...
Need help?
General
