44 System Maintenance
2. Use the LCD menu system to start the cleaning cycle.
a. Press the U
SER button.
Suspended displays on line 1 of the LCD panel.
b. Press E
NTER to enter the menu system.
3. Enter the Cleaning Card menu.
a. Maintenance displays on line 2 of the LCD panel. Press
E
NTER to enter the Maintenance menu.
b. Cleaning Card displays on line 2 of the LCD panel. Press
E
NTER to enter the Cleaning Card menu.
4. Run the cleaning card.
a. Start displays on line 2 of the LCD panel. Press E
NTER to
start the cleaning process.
b. Insert cleaning card displays on the LCD panel and the
card light blinks amber. Press the U
SER button to start the
cleaning cycle.
The cleaning card moves through the printer several times.
The card then moves into the embosser and cleans the
embosser rollers. It is ejected in the reject tray of the embosser.
5. Prepare the printer for use.
a. Unlock the printer.
b. Open the input hopper and replace the unprinted cards.
c. Open the printer cover and remove the print ribbon cartridge.
d. Place a new cleaning sleeve on the print ribbon cartridge and remove the protective
wrapper. Refer to “Load the Cleaning Sleeve” on page 36.
e. Return the print ribbon cartridge into the printer component.
f. Close the printer swingarm.
To Next Page
Loading...
Need help?
General
