DataCard SD160 User Manual

XPS Card Printer Driver User’s Guide 25
4. The operating system detects the new device and begins installation. What you see during
the installation process varies depending on your system’s current setup.
 A pop-up window may display during installation.
If the operating system does not display a pop-up window within a few minutes, check all
cables and connections to the printer, and then look at the PC’s Printers window to
determine whether the icon for the new printer displays. The software sometimes
installs without displaying the pop-up window.
 The operating system usually uses the existing Card Printer Driver files to install the driver
for the new printer. Insert the Driver Installation CD only if you are prompted for it.

DataCard SD160 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50/60 Hz
Card Capacity	100 cards input hopper, 25 cards output hopper
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Support	Windows 7, Windows 8, Windows 10
Card Thickness	0.020" to 0.030" (0.51 mm to 0.76 mm)
Print Speed	Up to 150 cards per hour (YMCKT)