DataCard SD160 User Manual

XPS Card Printer Driver User’s Guide 63
Chapter 4: Card Design Tasks
This chapter provides information about card design tasks you can
perform with the Card Printer Driver.
Use the following information to fine tune your card design and set up your card printing
preferences:
 Change a Card Design on page 64
 Design Tasks in Windows Printing Preferences on page 65
 Layout Tab on page 65
 Advanced Options on page 68
 Print Area Tab on page 81
 Color Adjustment Tab on page 89
 Print Mode Tab on page 92
 Lamination Tab on page 94
 Printer Setup for Rewritable Cards on page 96
 Card Design for UV Ribbon on page 99
 Escapes on page 102
 Magnetic Stripe Fonts on page 118

DataCard SD160 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50/60 Hz
Card Capacity	100 cards input hopper, 25 cards output hopper
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Support	Windows 7, Windows 8, Windows 10
Card Thickness	0.020" to 0.030" (0.51 mm to 0.76 mm)
Print Speed	Up to 150 cards per hour (YMCKT)