DataCard SD460 Installation And Administration Guide

64 Printer Manager
Changesettingsasneeded,andthenclickSetCurrenttoapplychanges.
• DatabaseVersion—Theversionnumberoftheoverlaydatabasecurrently
installed inthe laminator.TheoverlaydatabaseisanXMLfilethatcontains
thesupportedoverlaytypesandallowsthelaminatortoidentifythetypeof
overlayloadedineachcartridge.Youcandownloadanupdatedoverlay
databasefromtheDriversandDownloadspageatwww.datacard.com.Refer
to“Updates”onpage76forinformationaboutuploadingtheXMLfileto
yourlaminator.
• ExclusiveOverlayInL1,ExclusiveOverlayInL2—Usethesesettingstoenforce
thataspecifiedoverlaytypeisloadedintheL1orL2laminators.Thedefault
valueisDisabled,whichallowsanyoverlaytobeloadedinthelaminator
cartridges.Ifyouselectanoverlayname,thenamedoverlaymustbeloaded
inthespecifiedcartridgeorthejobwillbecanceledandasupplyerrorissued.
• OverlayDisplayedName—Select thenameoftheoverlaywhosesettingsyou
wanttochange.ClickSetCurrenttoapplytheoverlayselection.Youmustdo
thisbeforemakinganychangestotheoverlaysettings.
Thechangesyoumaketotheremainderofthesettingsonthispageapplyto
theselectedoverlaytype.Thesettingsapplyanytimethenamedoverlayis
loadedinthelaminator.
• OverlayLoadedInL1Name—ThenameoftheoverlaytypeloadedintheL1
laminatorcartridge.Thisinformationisobtainedfromthesupplyrolland
cannotbechanged.Iftheoverlaynameisthesameastheoverlaytype
selectedinOverlayDisplayedName,thevaluesyouspecifytothesettingson
thispageapplytotheoverlay.Iftheoverlaynameisnotthesame,nochanges
areapplied.
110) OverlayTemp
AdjustmentL1
0 15 [-20 – 40]
111) OverlayTemp
AdjustmentL2
0 0 [-20 – 40]
112) UserOverlay1Name None
113) UserOverlay2Name None
114) UserOver3Name None
115) UserOverlay4Name None
Description
Default
Value
Current Value
(unit)
Allowed
Range

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm