DataCard SD460 - Page 73

SD Series Installation and Administrator’s Guide 65
•
OverlayLoadedInL2Name—ThenameoftheoverlaytypeloadedintheL2
laminatorcartridge.Thisinformationisobtainedfromthesupplyrolland
cannotbechanged.Iftheoverlaynameisthesameastheoverlaytype
selectedinOverlayDisplayedName,thevaluesyouspecifytothesettingson
thispageapplytotheoverlay.Iftheoverlaynameisnotthesame,nochanges
areapplied.
• OverlayPartNumber—Thepartnumberoftheoverlaynamedin
OverlayDisplayedName.Thisfieldisobtainedfromthesupplyrolland
cannotbechanged.
• OverlaySpeed—Thedefaultspeed,instepspersecond,atwhichtoapplythe
overlaytypenamedinOverlayDisplayedName.Thisvalueisobtainedfrom
thesupplyrollandcannotbechanged.Makeadjustmentstothespeedusing
theOverlaySpeedAdjustmentsettings.
• OverlaySpeedAdjustmentL1,OverlaySpeedAdjustmentL2—Adjustthespeed
atwhichtoapplytheoverlaytypenamedinOverlayDisplayedNamewhenit
isloadedinthespecifiedcartridge.Thespeedadjustmentismeasuredin
stepspersecondofthemotorthatmovesthecard.Setthespeedasthe
differencebetweenthedefaultspeedvalue(showninOverlaySpeed)and
speedyouwanttouse.Decreasethespeedtoimprovehowtheoverlay
adherestothecard.Forexample,ifthedefaultis160,andyouwanttosetthe
speedto150,enter‐10.
• OverlayTemp—Thetemperatureatwhichtoapplytheoverlaytypenamedin
OverlayDisplayedName.ThisCurrentValueisobtainedfromthesupplyroll
andcannotbechanged.Makeadjustmentstothetemperatureusingthe
OverlayTempAdjustmentsettings.
• OverlayTempAdjustmentL1,OverlayTempAdjustmentL2—Adjustthe
temperatureatwhichtoapplytheoverlaytypenamedin
OverlayDisplayedNamewhenitisloadedinthespecifiedcartridge.Enterthe
temperatureadjustmentasthedifferencebetweentheDefaultValueandthe
recommendedtemperatureobtainedfromthesupplyroll,bothshownin
OverlayTemp,toapplytheselected
overlaytype.
• Increasethetemperaturetoimprovehowwelltheoverlayadherestothe
card.
• Decreasethetemperaturetopreventwrinklingoftheoverlay.