Datalogic Lynx Instruction Manual

LYNX™
4
4 TROUBLESHOOTING & MAINTENANCE
4.1 CABLE CONNECTIONS
Ensure your reader-to-host interface cable and the reader power supply cable are
correctly and firmly attached (see "System Connections" in par. 1.3).
If the reader is simply not functioning, contact your nearest Datalogic distributor.
4.2 MAINTENANCE
You do not need to perform regular preventative maintenance on the LYNX™ reader.
Do not try to open the case, because you might damage the interior electronic
components and such action voids the warranty.
You can keep your reader in good operating condition by:
• periodically cleaning the reading window using water or a mild detergent solution
and a soft cloth or tissue.
• watching for any damage to the housing.
CAUTION
Do not use abrasive cleaning agents on the reader's window to
avoid scratches. Do not use solvents on the housing or window to
avoid damage. Do not submerge the reader in water. It is not
waterproof.
112
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Datalogic Lynx Specifications

General

Display diagonal	2.7 \
Display resolution	320 x 240 pixels
Display number of colors	262144 colors
Flash memory	0.512 GB
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	microSD (TransFlash), microSDHC
Processor family	PXA 310
Processor frequency	0.806 GHz
Data network	HSPA+
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	2.0+EDR
Operating frequency	800, 850, 900, 1900, 2100 MHz
Security algorithms	CCX v4
Built-in camera	-
Interface	micro USB, RS-232
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Battery capacity	1800 mAh
RFID reader	No
Product color	Black
Keyboard layout	QWERTY
Keypad number of keys	46
Operating system installed	Windows Embedded Handheld 6.5

Weight and Dimensions

Depth	27 mm
Width	68 mm
Height	144 mm
Weight	270 g