Datalogic Lynx Instruction Manual

GETTING STARTED
1
You can set the Image Color Depth by selecting 256 gray levels (default), 16 gray
levels, or 2 gray levels. Higher color depths yield larger image files. This option is
ignored if the JPEG format is selected,(256 gray levels only).
1.4.4 Autoscanning
Normal Mode
Lynx™ provides an autoscan command (see par. 2.11.3), which when enabled,
causes the reader to scan continuously and to monitor the central zone of its reading
area. In this way, Lynx™ is ready to capture any image (containing a potential code)
positioned on a
uniform background.
The aiming system can be enabled to indicate the reading area of the potential code
to be captured. The illumination system can also be enabled when the ambient light
conditions are not sufficient to autodetect the potential code to be captured;
furthermore, the illumination system increases in intensity for an instant when
capturing and decoding an image. A safety time may be defined to prevent Lynx™
from reading the same code repeatedly.
If the decoding is completed successfully, the reader starts monitoring the reading
area again. In case of decoding failure, Lynx™ keeps on decoding until a potential
code is present in the central zone of the reading area.
Pattern Mode
The Autoscan pattern mode is particularly advised when reading barcodes positioned
on a
non-uniform background. In these cases Lynx™ may perceive some elements of
the background as barcodes and start the decoding. To avoid this undesired effect,
the Autoscan Pattern Code is placed in the Lynx™ reading area which prevents
decoding. Using this code as the background, code reading takes place normally by
presenting desired codes to be read over the Pattern Code. Between each code
read, the Pattern Code must be represented to Lynx™.
The Pattern Code can be printed from the file of the manual (Appendix C) available
on the CD-ROM.
In case of low ambient light conditions, Lynx™ automatically activates the illumination
system. If desired, the illumination system can be enabled so that it is always active.
9
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Datalogic Lynx Specifications

General

Display diagonal	2.7 \
Display resolution	320 x 240 pixels
Display number of colors	262144 colors
Flash memory	0.512 GB
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	microSD (TransFlash), microSDHC
Processor family	PXA 310
Processor frequency	0.806 GHz
Data network	HSPA+
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	2.0+EDR
Operating frequency	800, 850, 900, 1900, 2100 MHz
Security algorithms	CCX v4
Built-in camera	-
Interface	micro USB, RS-232
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Battery capacity	1800 mAh
RFID reader	No
Product color	Black
Keyboard layout	QWERTY
Keypad number of keys	46
Operating system installed	Windows Embedded Handheld 6.5

Weight and Dimensions

Depth	27 mm
Width	68 mm
Height	144 mm
Weight	270 g