CONFIGURATION USING BARCODE SYMBOLS
2
2.1 DEFAULT SETTINGS
Configuration Field Default Setting
RS232 Communication
Baud Rate 115200
Parity, Data Bits, Stop Bits No parity; 8 Data bits; 1 Stop bit
Handshake None
Protocol None
FIFO Enabled
Intercharacter Delay 0
Intercode Delay 0
USB COM Emulation
Handshake None
Protocol None
FIFO Enabled
Intercharacter Delay 0
Intercode Delay 0
USB Keyboard Emulation
*Keyboard Nationality USA
Intercharacter Delay 0
Intercode Delay 0
WEDGE-Communication
*Keyboard Nationality USA
CapsLock OFF
CapsLock Auto-Recognition ON
NumLock OFF
Intercharacter Delay 0
Intercode Delay 0
RX Timeout
10 seconds
Data Format-Symbology Independent Parameters
Code Identifier Disabled
Code Length Disabled
*Header No headers
*Terminator CR and LF terminators for RS232, USB
BULK, USB COM, USB Generic HID
ENTER terminator for Wedge, USB
Keyboard
Data Format-Symbology Dependent Parameters
Custom Code Identifier Disabled
Symbology Specific Format Select All
Header Symbology No headers
Terminator Symbology No terminators
Symbology Character Substitution No character to substitute
Symbology Character Deletion No character to delete
* The default values of these parameters are set when reading the interface selection.
15
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr