Programming
5-58 Magellan
TM
2200VS and 2300HS
OEM USB Scanner Device Type
The OEM USB protocol allows for the scanner to be identified as one of
two different types of barcode scanners. Depending on what other scan-
ners you may already have connected to a USB POS, you may need to
change this setting to enable all scanners to communicate. Options are:
•Fixed Position Scanner
• Handheld Scanner
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
OEM USB SCANNER DEVICE TYPE = FIXED POSITION SCANNER
OEM USB SCANNER DEVICE TYPE = HANDHELD SCANNER
To Next Page
Loading...
Need help?
General
