To Next Page

To Previous Page

Programming

5-200 Magellan

2200VS and 2300HS

Code 39 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 39.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

CODE 39 LENGTH CONTROL = VARIABLE-LENGTH

CODE 39 LENGTH CONTROL = FIXED-LENGTH

NOTE

If variable-length control was selected, you must now set the fea-

tures Code 39 Maximum Label Length and Code 39 Minimum

Label Length. If fixed-length control was selected, you must now

set Code 39 Fixed Length 1 and Code 39 Fixed Length 2.

Datalogic Magellan 2200VSΩ Product Reference Guide

Other manuals for Datalogic Magellan 2200VSΩ