Datalogic MAGELLAN 8500 User Manual

6-42 Magellan
®
8500 Scanner
Scale LED Enable
This feature enables/disables Scale LED (Yellow LED) operation.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the two bar codes below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE LED = DISABLE
SCALE LED = ENABLE

Datalogic MAGELLAN 8500 Specifications

General

Brand	Datalogic
Model	MAGELLAN 8500
Category	Barcode Reader
Language	English