Datalogic MAGELLAN 8500 User Manual

6-232 Magellan
®
8500 Scanner
Codabar AIM ID
This feature enables/disables transmission of the Codabar AIM symbology
identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR AIM ID = DISABLE
CODABAR AIM ID = ENABLE

Datalogic MAGELLAN 8500 Specifications

General

Brand	Datalogic
Model	MAGELLAN 8500
Category	Barcode Reader
Language	English