Datalogic MAGELLAN 8500 User Manual

6-200 Magellan
®
8500 Scanner
Code 128 Enable
Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 = DISABLE
CODE 128 = ENABLE

Datalogic MAGELLAN 8500 Specifications

General

Brand	Datalogic
Model	MAGELLAN 8500
Category	Barcode Reader
Language	English